Merry Christmas!

We wish you the best of Christmas joy! 

We braved the cold (35 degrees!) on Christmas Eve to spend our first night on the bus! The propane heater, small electric heater, 2 blankets, 1 quilt and a down comforter made for some good sleeping. Santa found us even without a chimney. 

It's been a cozy day getting acquainted with our tiny house on wheels. There's still plenty of work to do before we move in full time, but we can see the light at the end of the tunnel! 

The Loo

Composting toilet. Yes. Those are THE words describing our toilet. The whole unit cost us about $20 and will require no water. We looked into incinerating toilets and commercial composting toilets, but for this beginning stage, we decided to go easy and cheap. 

The best part is not having to deal with a septic line around the wheel well. Joshua has been using scrap wood to create a cabinet of sorts to hold the bucket. (Don't you just love how our shower and toilet buckets match!!) 

As the platforms/steps came together, I drew out the patterns for the top pieces. The roofing tin around the shower creates such a crazy rippled effect, I felt like I was working on a wrapper for a Reese's Cup. 

Protected from the rain by a gigantic tarp, we cut all the intricate pieces for the platform. And no,the pictures don't quite show off the fit of the wood against the tin. There's just a few little details left to touch up and the throne will be complete! I'm feeling a fun, folk art paint job coming in this space. There's already chalkboard paint inside ready for graffiti. 

For those of you not quite sure about a composting toilet, think biodegradable liner for the bucket, a scoop of sawdust for every deposit and daily emptying. And quite possibly a lot of incense! 

The "LIST"

1. Finish shower surround

2. Finish toilet and toilet step.

3. Cubbies beside the bed. 

4. Shower plumbing supply line.

5. Light for the shower/toilet.

6. Propane line for cook top. 

7. Mount cooktop.

8. Install fan over range.

9. Install electrical panel/outlets.

10. Cabinet anchors.

11. Finish installing dc lights on driver's side.

12. Install globe light over couch.

13. Sew curtains.

14. Complete sink drain and water supply.

15. Carpet/insulation under and around driver area

16. Table leg/support for music studio table.

17. Touch up cabinet paint.

18. Install cabinet hardware.

19. Curtain rod and trim board. 

20. Sofa anchors. 

21. Refrigerator/microwave anchor.

22. Water heater installation.

23. Lock on front door.

24. Under bus: water supply, drains, battery box and wiring.

25. CLEAN! 

Getting cleaned up!

How would you put a functional shower on a school bus? Most shower stalls are over 6 feet tall - that's our max height! Our inspiration came from a beautiful shower in a tiny house created out of an old wine barrel.

Nope. No wine barrel for us. A galvanized metal feed trough will do just fine! And hopefully, it will be less permeable than wood. We drilled through the floor of the trough and the bus to install the drain, which will connect to a flexible pipe. It will be able to drain into a holding tank or a RV septic system. (Gray water is also great for watering plants)

Joshua used roofing tin to create a shower surround. We will be treating the raw edges of metal with silicone to help ward off rust. The pipe frames the sides of the opening into the shower and will hold the shower rod.

We're still figuring out the fixtures and plumbing parts. Due to the height constrains, a hand-held nozzle with an on/off switch seems like the best solution. Stay tuned!